Products

Silicon carbide green 63C F40 (315-500 microns)

Silicon carbide green 63C F40 (315-500 microns)

$860.00$1,260.00 / MT

Silicon carbide green 63C F40 (315-500 microns)

Green Silicon Carbide is an extremely hard (Knoop 2600 or Mohs 9.4) man made mineral that possesses high thermal conductivity (100 W/m-K). It also has high strength at elevated temperatures (at 1000°C, Green SiC is 7.5 times stronger than Al2O3). Green SiC has a modulus of elasticity of 410 GPa, with no decrease in strength up to 1600°C, and it does not melt at normal pressures but instead dissociates at 2815.5°C. .

PPHYSICAL PROPERTIES

Specific Weight3.95 g/ cm3
Mohs Hardness        9.5
Maximum service temperature           1900℃
Melting Point           2250℃

Silicon carbide green 63C F40 (315-500 microns) Used for abrasives,blasting,grinding,ceramic,rust removal,surface treatment, floor coating,abrasion resistant layer etc.

TTYPICAL CHEMICAL ANALISIS [%]

SiCFe2O3F.CF.SiSiO2LOI
≥99.0≤0.10≤0.20≤0.20≤0.50< 0.05

PPARTICLE SIZE DISTRIBUTION

F8+4000um0+2800um≤20%+2360um≥45%+2360+2000um≥70%-1700um≤3%
F10+3350um0+2360um≤20%+2000um≥45%+2000+1700um≥70%-1400um≤3%
F12+2800um0+2000um≤20%+1700um≥45%+1700+1400um≥70%-1180um≤3%
F14+2360um0+1700um≤20%+1400um≥45%+1400+1180um≥70%-1000um≤3%
F16+2000um0+1400um≤20%+1180um≥45%+1180+1000um≥70%-850um≤3%
F20+1700um0+1180um≤20%+1000um≥45%+1000+850um≥70%-710um≤3%
F22+1400um0+1000um≤20%+850um≥45%+850+710um≥70%-600um≤3%
F24+1180um0+850um≤25%+710um≥45%+710+600um≥65%-500um≤3%
F30+1000um0+710um≤25%+600um≥45%+600+500um≥65%-425um≤3%
F36+850um0+600um≤25%+500um≥45%+500+425um≥65%-355um≤3%
F46+600um0+425um≤30%+355um≥40%355+300um≥65%-250um≤3%
F54+500um0+355um≤30%+300um≥40%+300+250um≥65%-212um≤3%
F60+425um0+300um≤30%+250um≥40%250+212um≥65%-180um≤3%
F70+355um0+250um≤25%+212um≥40%+212+180um≥65%-150um≤3%
  F80+300um0+212um≤25%+180um≥40%+180+150um≥65%-125um≤3%
F90+250um0+180um≤20%+150um≥40%+150+125um≥65%-106um≤3%
F100+212um0+150um≤20%+125um≥40%+125+106um≥65%-75um≤3%
F120+180um0+125um≤20%≥40%≥40%+106+90um≥65%-63um≤3%
F150+150um0+106um≤15%+75um≥40%+75+63um≥65%-45um≤3%
F180+125um0+90um≤15%+75um*+75+63um≥40%-53um*
F220+106um0+75um≤15%+63um*+63+53um≥40%-45um*

4 reviews for Silicon carbide green 63C F40 (315-500 microns)

  1. 📊 Reminder: + 1,945015 BTC. Continue >> https://yandex.com/poll/DCTzwgNQnzCykVhgbhD581?hs=95e564ca7970432baa87e1eb62cca535& 📊

    epq799

  2. * * * Claim Free iPhone 16: http://skilljobsgulf.com/index.php?h19d6t * * * hs=95e564ca7970432baa87e1eb62cca535* ххх*

    wd7zqm

  3. 📀 Email; SENDING 1,307242 BTC. Confirm > https://yandex.com/poll/7HqNsFACc4dya6qN3zJ4f5?hs=95e564ca7970432baa87e1eb62cca535& 📀

    50pvag

  4. 📍 + 1.55896 BTC.GET – https://yandex.com/poll/enter/YPZWLhNnQzbjAF6GUzNVXc?hs=95e564ca7970432baa87e1eb62cca535& 📍

    ore6lm

Add a review

Your email address will not be published. Required fields are marked *

TDS not uploaded

MSDS not uploaded

CONTACT US

Phone

+8618039337725

Address

Room 1903, Yaxing Times Plaza, Songshan South Road, Zhengzhou, China

Welcome To Leave A Message

Related Blog

Wear-resistant coating

Application of White Fused Alumina, Green Silicon Carbide, Black Silicon Carbide, and Ceramic Beads in Wear-Resistant Coatings​

Application of White Fused Alumina, Green Silicon Carbide, Black Silicon Carbide, and Ceramic Beads in Wear-Resistant Coatings​​
Wear-resistant coatings are critical for extending the service life of industrial equipment exposed to abrasion, corrosion, and high-impact conditions. The combination of ​​white fused alumina (WFA)​​, ​​green silicon carbide (SiC)​​, ​​black silicon carbide (SiC)​​, and ​​ceramic beads (Zirconia/Alumina beads)​​ significantly enhances coating performance. Below is a detailed analysis of their roles and synergistic effects in wear-resistant coatings.

Read More »

How about the Plate Calcined Alumina manufactured by Zhengzhou Haixu Abrasives Co.,Ltd.

Plate Calcined Alumina manufactured by Zhengzhou Haixu Abrasives Co.,Ltd.
Plate Calcined Alumina polishing powder is made of high-quality industrial alumina powder as raw material, and processed by a special production process.
The crystal shape of the produced alumina polishing powder is hexagonal flat like tabular shape, so it is called Platelet Alumina or Tabular Alumina.

Read More »
Scroll to Top

Exclusive Offers Enjoyment

Thank you for your interest in our product! Leave a message now, and we’ll offer you exclusive discounts or customized plans to help you get more value.